Reference
Planning a glue-up: time and clamping force
How long the glue on the shelf actually gives you once it is on the wood, how that divides across the joints you mean to do at once, and what clamping force the maker's published pressure range works out to.
Assumptions behind the numbers
- Every open assembly time, total assembly time and minimum application temperature here is the manufacturer's own published product data, not an independent test.
- All three Titebond figures are published at 70 °F and 50 percent relative humidity. A colder or drier room is not that, and the makers do not publish a correction, so the calculator shows the published figures and flags a room below the product's minimum rather than adjusting the times.
- Titebond's page for Titebond III gives two minimum application temperatures, 47 °F on its data line and 45 °F in its limitations text. The calculator shows both rather than choosing one.
- The hot hide glue range of 110 to 160 °F, with 140 °F named best and 180 °F named as a limit, is Old Brown Glue's own figure for glue temperature, not room temperature.
- Clamping pressure ranges of 100 to 150 psi for softwoods, 125 to 175 for medium woods and 175 to 250 for hardwoods are Titebond's published figures, given on all three product pages.
- No source here publishes a clamping time or a full cure time, so neither calculator states one. Nor is there a sourced figure for how much force a given clamp delivers, so the calculator reports the force the pressure range calls for and stops there.