Humidity and movement: two calculators
Reference

Humidity and movement: two calculators

What the moisture content of wood in your room is heading for, and what the difference between your winter and your summer does to the width of one tabletop. Both from the federal Wood Handbook.

Assumptions behind the numbers

  • Equilibrium moisture content comes from Equation 4-5 of the Wood Handbook (FPL-GTR-282, Chapter 4, Glass and Zelinka 2021), using that chapter's published Fahrenheit parameters.
  • Shrinkage percentages are from Tables 4-3 and 4-4 of the same chapter, green to ovendry, expressed as a percentage of the green dimension. The handbook notes that the imported-species values in Table 4-4 were collected from world literature and may not represent a true species average.
  • Fiber saturation is taken as 30 percent moisture content, which is the handbook's own approximation where the actual value for a species is not known.
  • Tangential shrinkage values are used for plainsawn material and for mixed or unknown ring orientation, and radial values for quartersawn, as the handbook directs.
  • The handbook states that the 0.1 percent precision of its moisture content table is not meaningful, and that accurately predicting the shrinkage of an individual piece of wood is impossible, while the average over a sufficient quantity of pieces predicts well. It puts transverse and volumetric shrinkage variability at about a 15 percent coefficient of variation.
  • The moisture content values were derived primarily for Sitka spruce, under a condition midway between absorption and desorption, and the handbook says actual values vary considerably with species, humidity and temperature.
  • The arithmetic assumes the whole board has reached equilibrium with the room. A thick top takes months to get there and a finish slows it further, so a real piece lags its room and never reaches the extremes this calculator shows.