Your condition report
Your furniture file

Your condition report

Six sheets that hold everything the chapters ask you to write down about one piece. Seeded from your setup; everything you type stays in this browser and nothing is sent anywhere.

Three of these six sheets are essential on a first pass: What it is, Condition, part by part and The hazards pass. Together they are the condition report this manual exists to produce. Surface faults matters as soon as you are thinking of cleaning anything. The plan and What was done fill themselves in as you decide and do things, and a reader who skips them still has a usable record; what they lose is the reasoning behind their own decisions, which is the part nobody remembers six months later.

What it is

One row per piece. Essential on a first pass. Write "not sure" where you are not sure; a blank cell reads as forgotten rather than unknown.

Condition, part by part

One row per part you can reach. Essential on a first pass. Walk the piece in a fixed order and write what you see, not what you think it means.

Surface faults

One row per fault, with its size. Essential on a first pass for any piece you are thinking of cleaning. The cause column is your best reading, not a verdict.

The hazards pass

The same list for everyone, because the point of a pass is that you do all of it. Tick each line, write what you found, and give the piece a decision before it comes indoors.

The plan

One row per thing you will do, and one row per thing you have decided not to do. A blank quote means nobody has quoted yet, not that the work is free, so the total says how many lines are unanswered.

What was done

What went into the piece and when. Optional on a first pass, and the sheet you will be gladdest of in ten years, because it tells the next person what is in the joints.

How to use these sheets

  • One row per thing. One row per piece on What it is, one per part on Condition, one per fault on Surface faults, one per decision on The plan, one per session on What was done. A row that covers two parts cannot be read later.
  • Record, do not conclude. The fault, extent, joint and size columns hold what you observed. The cause column on Surface faults is labeled "as far as you can tell" because it holds your reading. The Doing it or not and Why columns on The plan hold decisions. Keeping those three kinds of entry in different columns is the whole method, and Writing a condition report explains why.
  • Measure, do not describe. "4 in across, 6 in from the left edge" survives a change of reader; "quite a large mark" does not.
  • Write "not sure" rather than leaving a cell blank. In two years a blank reads as forgotten and "not sure" still reads as information.
  • Date everything. Active and stable are distinguished by two dated readings, and no single visit can tell them apart.
  • A blank quote on The plan means nobody has quoted yet. That column treats a blank as unanswered rather than as zero, and the total says how many lines are still unanswered. Enter 0 only where the work really is free.
Fictional example

The example row on What was done is Dana's walnut chest, one of this manual's four fictional cases, following the session in Cleaning furniture, waxing it, and reviving a tired finish. It is there to show three habits rather than to be copied.

It names the materials ("mineral spirits; paste wax (silicone-free)") rather than saying "cleaned and polished", because the next person needs to know what is on the surface. It records what was deliberately not done ("The white ring is still there"), so nobody later assumes it was tried and failed. And it gives the reason a step was skipped ("Shellac finish, so no water anywhere near it"), which is what makes the entry useful rather than merely true.

Delete it whenever you like. Seeding only ever fills a sheet that is still empty, so your own rows are never overwritten.

Limits

These sheets hold what you observed, what you decided and what you did. They are not a diagnosis, not a valuation and not a certification.

A completed hazards pass means the listed things were looked for, by you, on one day; it does not clear a piece, and What can hurt you in old furniture says what does. The Condition sheet records joints as you found them under gentle hand pressure, which is not a statement that a piece is safe to use. And nothing here establishes what anything is worth: this manual does not value furniture, and where value is in question an appraiser settles it before any work, which is set out in What not to do to old furniture, and why.

Everything you type stays in this browser. Nothing is uploaded, and the only way it reaches another device is the share link or an export from your furniture file.