Glossary
Reference

Glossary

Every term the chapters introduce, in the sense this manual uses it, with the chapter that defines it.

Where a term has a published definition from a professional body, that definition is marked and the body is named. Where the manual is using a word in the ordinary trade sense, it says so, because several of these words are used differently by different trades and that is a frequent source of confusion.

Terms used in this manual
TermIn this manualWhere it is introduced
ApronThe rail running between the legs under a tabletop. On a table it is the structure; the top carries very little horizontal load, which is why the conservation guidance says to lift a table by the apron or the legs rather than the topJoints, racking and breaks
BentwoodA part shaped by steam-bending solid stock, as distinct from a laminated curve built up from glued layers. A laminated curve shows its layers on an edgeWhat your piece of furniture is actually made of
BloomA cloudiness in a wax layer or finish. The waxing guidance attributes clouding to wax applied in excessive heat or relative humidity, and says it can be removed with mineral spirits and the surface rewaxed once the environmental problems are correctedSurfaces, veneer and hardware
ConservationDefined by the American Institute for Conservation as the profession devoted to preserving cultural property for the future, taking in examination, documentation, treatment and preventive careWho to hire for furniture work
ConservatorAIC's definition: a professional whose primary occupation is the practice of conservation, working under an ethical code. AIC says conservator is the preferred term in the United StatesWho to hire for furniture work
CrazingA fine network of cracks through the thickness of a finish film, visible in raking light, as an aging film shrinks and loses flexibility while the wood beneath keeps moving seasonallySurfaces, veneer and hardware
DovetailA joint of interlocking wedge-shaped pins and tails, common at drawer corners. Hand-cut examples vary in size and spacing and often show a scribed line across the tails; machine-cut ones are regularHow old your furniture is
Equilibrium moisture contentThe moisture content at which wood is neither gaining nor losing moisture in given conditions of temperature and relative humidity. Calculated in this manual from the federal Wood Handbook's Equation 4-5Humidity and movement
Fiber saturation pointThe moisture content below which wood begins to shrink. The handbook says the point below which most wood properties start to change averages about 30 percent moisture content, varying by several points between species and pieces, and offers 30 percent as an approximation where the real value is unknownHumidity and movement
Fish eyesSmall crater-like indentations that appear where a new finish pulls back from silicone contamination in the surface. The Park Service notes that silicone residue can remain even when an old finish has been stripped to bare woodCleaning furniture, waxing it, and reviving a tired finish
FrassThe fine powdered material pushed out of exit holes by wood-boring beetles. Powder the color of freshly sawed wood suggests an active infestation; yellowed or caked powder suggests old damageWhat can hurt you in old furniture
Glue blockA small block glued into an internal corner to stiffen a joint, commonly found inside chair frames and under tabletopsThe furniture repairs worth doing yourself
HardboardA thin dense fiber sheet, usually with one smooth face and one textured, often used for the back of a caseWhat your piece of furniture is actually made of
Hide glueAn animal protein glue, available hot or as a liquid product. Its manufacturers say it is the only glue that bonds to itself, and that reversing a bond takes a combination of heat and moisture, with dry heat alone said not to be enough in most casesThe furniture repairs worth doing yourself
LacquerAn evaporative finish whose film redissolves in lacquer thinner. Nitrocellulose lacquer became available in the 1920s and slowly replaced shellacFinding out what finish is on your furniture
Manufactured boardThis manual's cover term for plywood, particleboard, fiberboard and MDF: sheets made by gluing wood in plies, chips or fibersWhat your piece of furniture is actually made of
MarquetryA decorative surface built from many pieces of veneer, sometimes with ivory, bone, tortoiseshell, mother-of-pearl, metal, straw or horn. Named within AIC's Wooden Artifacts specialty, and specialist workSurfaces, veneer and hardware
MDFMedium-density fiberboard: a dense uniform board with no visible grain, which breaks with a smooth chalky face. Swells when wet, and a swollen screw hole will not hold that screw againWhat your piece of furniture is actually made of
Mineral spiritsA petroleum-distillate solvent, sold as paint thinner and known industrially as Stoddard solvent. Dissolves wax; used in the finish test and the published cleaning routine. A Class II combustible liquid with a flash point of 102 to 110 °FFinding out what finish is on your furniture
Mortise and tenonA joint in which a projecting tongue, the tenon, fits a cut socket, the mortise. Common where chair and table rails meet legs. The glue usually fails before the wood doesJoints, racking and breaks
PatinaUsed three ways and worth pinning down. An antiques dealer quoted by Antiques Roadshow defines it broadly as everything that happens to an object over the course of time. In the furniture trade it often means the particular look of an aged surface. In metalwork it means a surface layer that can be deliberately appliedWhat not to do to old furniture, and why
ParticleboardA board of chips and flakes bound in resin, which crumbles rather than splinters. Absorbs water and swells, and the swelling tends not to reverseWhat your piece of furniture is actually made of
Powderpost beetleA cover term for lyctid, anobiid and bostrichid wood-boring beetles. The families differ in the woods they attack, the moisture they need and, importantly, whether they re-infest indoorsWhat can hurt you in old furniture
Preventive careAIC's definition: mitigating deterioration through policies and procedures on environment, handling, maintenance, storage, exhibition, packing, transport and use, integrated pest management and emergency preparednessWho to hire for furniture work
Primary woodThe wood a piece shows: top, drawer fronts, visible facesWhat your piece of furniture is actually made of
RackingSideways distortion of a frame in which the joints stay joined but the angles change, so a rectangle becomes a parallelogram and springs back. The quickest structural test there isJoints, racking and breaks
Raking lightLight arriving almost parallel to a surface, from one side, so that anything standing proud casts a shadow and anything recessed fills with one. Shows shape where flat light shows only colorSurfaces, veneer and hardware
ReamalgamationThe professional technique of reworking a deteriorated shellac film with its own solvent so that the existing finish re-forms rather than being replaced. Named in this manual and deliberately not described, because the research found no source for the method meeting the standard the rest of the manual is held toCleaning furniture, waxing it, and reviving a tired finish
RefinishingA trade term rather than a conservation one: removing the existing surface coating and applying a new oneWhat not to do to old furniture, and why
RestorationAIC's definition: treatment procedures intended to return cultural property to a known or assumed state, often through the addition of non-original material. AIC defines treatment as something that may consist of stabilization, restoration or both, so restoration sits inside conservation rather than opposite itWho to hire for furniture work
Secondary woodWhat a piece is built from behind its show surfaces: drawer sides, bottoms and backs, back boards, glue blocks, dust boards. Usually unfinished, usually local, and usually originalWhat your piece of furniture is actually made of
ShellacAn evaporative finish whose film redissolves in denatured alcohol. Widely available by the 1820s and the dominant furniture finish for about a century after that. Softened by water and by alcoholFinding out what finish is on your furniture
Shrinkage, radial and tangentialHow much a wood changes dimension as it dries, expressed as a percentage of the green dimension. The handbook directs that tangential values be used for the width of plainsawn material and radial for quartersawn, with tangential suggested for mixed or unknown ring orientationHumidity and movement
SiliconeAn additive in most commercial furniture polishes and in almost all liquid and aerosol wax preparations, used for easier application and higher gloss. Leaves a film that is difficult to remove and interferes with future finish treatmentsCleaning furniture, waxing it, and reviving a tired finish
Solid woodA part that is one piece of wood, or several boards joined edge to edge, through its whole thickness. On an edge, the grain continues from the faceWhat your piece of furniture is actually made of
StabilizationAIC's definition: treatment procedures intended to maintain the integrity of cultural property and minimize deteriorationWho to hire for furniture work
SubstrateThe material a veneer is glued to: solid wood, plywood, particleboard or MDF. Also called the core. What it is changes what a lifted or lost veneer meansWhat your piece of furniture is actually made of
TreatmentAIC's definition: the deliberate alteration of the chemical or physical aspects of cultural property, aimed primarily at prolonging its existence. May consist of stabilization, restoration, or bothWho to hire for furniture work
VarnishA reactive finish that cures chemically into a film which does not redissolve in the solvent it came in, which is why it resists the solvent test. In this manual's test, a non-reaction indicates varnish or one of the newer solvent-resistant finishes, which is a group rather than a nameFinding out what finish is on your furniture
VeneerA thin sheet of wood glued over a different material. A construction method rather than a mark of quality: a great deal of highly regarded furniture is veneered. What it changes is what may safely be done to the surfaceWhat your piece of furniture is actually made of
Veneer, lifted versus lostLifted means the facing has released from its substrate but is still present and springs back under a fingertip. Lost means the facing is gone over some area. Press to find out; lifting the edge to look is how a lifted edge becomes a lost oneSurfaces, veneer and hardware
White ringA pale ring or patch, usually moisture trapped in a finish film rather than a stain in the wood. On shellac, alcohol produces the same effect. Whether it is in the finish or in the wood is settled by raking light and a fingernail, and decides whether anything can be doneSurfaces, veneer and hardware
Limits

Definitions marked as AIC's are that organization's published wording, closely paraphrased. The rest are this manual's usage, which follows the ordinary trade sense where there is one.

Three of these words are used differently by different trades, and it is worth knowing which rather than assuming a shared meaning: restoration, which the conservation body places inside conservation while much of the antiques trade contrasts the two; patina, which means something broader in the antiques trade than in the furniture trade and something different again in metalwork; and conserved, which a commercial antiques glossary uses descriptively without defining. When commissioning work, the useful question is not what somebody calls the job but what will be removed, what will be added, and what that rules out later. Who does what has the rest of those questions.